|
|
|
This page describes how to configure a VM for running ETSI TeraFlowSDN(TFS) controller using [VMWare Fusion](https://www.vmware.com/products/fusion.html). It has been tested with VMWare Fusion version 12 and 13.
|
|
|
|
|
|
|
|
# Create VM in VMWare Fusion:
|
|
|
|
|
|
|
|
In "VMWare Fusion" manager, create a new network from the "Settings/Network" menu.
|
|
|
|
|
|
|
|
- Unlock to make changes
|
|
|
|
- Press the + icon and create a new network
|
|
|
|
- Change the name to TFS-NAT-Net
|
|
|
|
- Check "Allow virtual machines on this network to connect to external network (NAT)"
|
|
|
|
- Do not check "Enable IPv6"
|
|
|
|
- Add port forwarding for HTTP and SSH
|
|
|
|
- Uncheck "Provide address on this network via DHCP"
|
|
|
|
|
|
|
|
Create a new VM an Ubuntu 22.04.1 ISO:
|
|
|
|
|
|
|
|
- Display Name: TeraFlowSDN
|
|
|
|
- Username: tfs
|
|
|
|
- Password: tfs123
|
|
|
|
|
|
|
|
On the next screen press "Customize Settings", save the VM and in "Settings" change:
|
|
|
|
- Change to use 4 CPUs
|
|
|
|
- Change to access 8 GB of RAM
|
|
|
|
- Change disk to size 60 GB
|
|
|
|
- Change the network interface to use the previously created TFS-NAT-Net
|
|
|
|
|
|
|
|
Run the VM to start the installation.
|
|
|
|
|
|
|
|
# Install Ubuntu 22.04.1 LTS Operating System
|
|
|
|
|
|
|
|
The installation will be automatic, without any configuration required.
|
|
|
|
|
|
|
|
- Configure the guest IP, gateway and DNS:
|
|
|
|
|
|
|
|
Using the Network Settings for the wired connection, set the IP to 10.0.2.10,
|
|
|
|
the mask to 255.255.255.0, the gateway to 10.0.2.2 and the DNS to 10.0.2.2.
|
|
|
|
|
|
|
|
- Disable and remove swap file:
|
|
|
|
|
|
|
|
$ sudo swapoff -a
|
|
|
|
$ sudo rm /swapfile
|
|
|
|
|
|
|
|
Then you can remove or comment the /swapfile entry in /etc/fstab
|
|
|
|
|
|
|
|
- Install Open SSH Server
|
|
|
|
- Import SSH keys, if any.
|
|
|
|
|
|
|
|
- Restart the VM when the installation is completed.
|
|
|
|
|
|
|
|
# Upgrade the Ubuntu distribution
|
|
|
|
```bash
|
|
|
|
sudo apt-get update -y
|
|
|
|
sudo apt-get dist-upgrade -y
|
|
|
|
``` |
