(CNIT) Basic point-to-multipoint optical connections

Proposers

  • Marc Lawson (CNIT)
  • Andrea Sgambelluri (CNIT)
  • Nicola Sambo (CNIT)

Description

Adds point-to-multipoint optical connectivity. The optical controller computes a P2MP path over a multicast tree (RSA_P2MP) and the service layer provisions it through the standard TFS Service API.

New resources: AddMultiLightpath, AddMultiLightpathComp, DelMultiLightpath, GetTopologyMulti, MorePathAdditonMultipath and the TAPI get-topology, compute-p2mp, more-path-addition-multipath, get-active-paths and delete-p2mp operations. They live in their own module and are bound to their URLs by register(), so OpticalController.py gains 16 lines and none of its existing resources move.

Service side, OCServiceHandler/OCTools turn endpoints into per-remote flows for the task scheduler, Context's optical-channel delete unpacks P2MP flows, and PathComp resolves the optical controller by service discovery rather than a hardcoded address.

Four defects were fixed to make a service request reach the devices: P2MP slot selection now honours develop's persisted spectrum state instead of treating every slot as free; Context tolerates the numeric fields a ROADM leaves unset; and the configure and deconfigure paths skip devices that have no stored optical configuration.

This supersedes the optical-controller part of !496 (closed) and is built from current develop, so 6cffadd9's spectrum persistence, AddAlienFLexLightpath, ReconfigFlexLightpath and test_spectrum_sync.py are all intact. RSA.py is unmodified. No proto change.

Closes #316 (closed)

Demo / definition of done

  • compute-p2mp returns a TAPI connectivity-service for one hub and several leaves, with a consistent spectrum assignment across the tree.
  • A P2MP service created through the Service API configures every transponder on the path.

Test evidence

  • src/opticalcontroller/tests/: 20 passed in the component image; the test sources are byte-identical to develop.
  • End to end on a deployed TFS with real NETCONF devices: a service through the Service API reached SERVICESTATUS_ACTIVE and configured every transponder, no errors in the service or device components. Three sources with subcarriers_per_src = 4,4,4 produced slots [0,1,2,3], [4,5,6,7], [8,9,10,11] — twelve subcarriers, contiguous and non-overlapping, one group per source. Confirmed on the devices over NETCONF, not only in Context. Deleting the service released the path cleanly.

Acknowledgements

This work is funded by the European Commission through the HORIZON-JU-SNS-2023 PROTEUS-6G project with Grant Agreement number 101139134.

Edited by Andrea Sgambelluri

Merge request reports

Loading
Loading