Loading proto/context.proto +3 −2 Viewed Changes for proto/context.proto: 3 added lines, 2 removed lines. Original line number Diff line number Diff line Loading @@ -260,8 +260,9 @@ enum DeviceDriverEnum { DEVICEDRIVER_GNMI_NOKIA_SRLINUX = 19; DEVICEDRIVER_OPENROADM = 20; DEVICEDRIVER_RESTCONF_OPENCONFIG = 21; DEVICEDRIVER_CUSTOM_IPOWDM = 22; DEVICEDRIVER_MIKROTIK_ROUTEROS = 23; DEVICEDRIVER_NETCONF_OC_PLUGGABLE = 22; DEVICEDRIVER_CUSTOM_IPOWDM = 23; DEVICEDRIVER_MIKROTIK_ROUTEROS = 24; } enum DeviceOperationalStatusEnum { Loading proto/kpi_sample_types.proto +5 −1 Viewed Changes for proto/kpi_sample_types.proto: 5 added lines, 1 removed line. Original line number Diff line number Diff line Loading @@ -77,6 +77,10 @@ enum KpiSampleType { KPISAMPLETYPE_INT_DROP_REASON = 2202; // PLUGGABLES KPISAMPLETYPE_PRE_FEC_BER = 2301; KPISAMPLETYPE_PRE_FEC_BER_PLUGGABLE = 2301; KPISAMPLETYPE_RECEIVED_POWER_PLUGGABLE = 2302; // PLUGGABLES Aggregated Output KPIs KPISAMPLETYPE_PRE_FEC_BER_PLUGGABLE_AGG_OUTPUT = 3301; KPISAMPLETYPE_RECEIVED_POWER_PLUGGABLE_AGG_OUTPUT = 3302; } proto/pluggables.proto +59 −50 Viewed Changes for proto/pluggables.proto: 59 added lines, 50 removed lines. Original line number Diff line number Diff line Loading @@ -28,6 +28,48 @@ service PluggablesService { } message CreatePluggableRequest { context.DeviceId device = 1; int32 preferred_pluggable_index = 2; // -1 for auto (physical slot number in the device(router)) PluggableConfig initial_config = 3; } message ListPluggablesRequest { context.DeviceId device = 1; View view_level = 2; } message ListPluggablesResponse { repeated Pluggable pluggables = 1; } message GetPluggableRequest { PluggableId id = 1; View view_level = 2; } message DeletePluggableRequest { PluggableId id = 1; } message ConfigurePluggableRequest { PluggableConfig config = 1; View view_level = 2; int32 apply_timeout_seconds = 3; // Not Implemented yet (for timeout) } // to control the level of detail in responses enum View { VIEW_UNSPECIFIED = 0; VIEW_CONFIG = 1; VIEW_STATE = 2; VIEW_FULL = 3; } // ----------------------------------------------------------------------------- // Pluggable and Digital Subcarrier Messages // ----------------------------------------------------------------------------- message PluggableId { context.DeviceId device = 1; int32 pluggable_index = 2; // physical slot number in the device Loading @@ -47,8 +89,8 @@ message DigitalSubcarrierConfig { DigitalSubcarrierId id = 1; bool active = 2; double target_output_power_dbm = 3; double center_frequency_hz = 10; double symbol_rate_baud = 11; double center_frequency_hz = 4; double symbol_rate_baud = 5; } message DigitalSubcarrierState { Loading @@ -56,7 +98,7 @@ message DigitalSubcarrierState { bool active = 2; double measured_output_power_dbm = 3; double osnr_db = 4; context.Timestamp updated_at = 10; context.Timestamp updated_at = 5; } message DigitalSubcarrierGroupConfig { Loading @@ -64,7 +106,7 @@ message DigitalSubcarrierGroupConfig { int32 group_size = 2; // expected number of DSCs double group_capacity_gbps = 3; // from YANG group capacity in Gbps double subcarrier_spacing_mhz = 4; // from YANG digital-subcarrier-spacing repeated DigitalSubcarrierConfig subcarriers = 10; repeated DigitalSubcarrierConfig subcarriers = 5; } message DigitalSubcarrierGroupState { Loading @@ -72,8 +114,15 @@ message DigitalSubcarrierGroupState { int32 count = 2; // available DSCs double group_capacity_gbps = 3; double subcarrier_spacing_mhz = 4; repeated DigitalSubcarrierState subcarriers = 10; context.Timestamp updated_at = 20; repeated DigitalSubcarrierState subcarriers = 5; context.Timestamp updated_at = 6; } message PluggableChannelConfig { string channel_name = 1; double center_frequency_mhz = 2; double target_output_power_dbm = 3; repeated DigitalSubcarrierGroupConfig dsc_groups = 4; } message PluggableConfig { Loading @@ -83,13 +132,14 @@ message PluggableConfig { int32 operational_mode = 4; // e.g., 0=off and 1=on int32 line_port = 5; // line port number string channel_name = 6; // channel name repeated DigitalSubcarrierGroupConfig dsc_groups = 10; repeated DigitalSubcarrierGroupConfig dsc_groups = 7; repeated PluggableChannelConfig channel_configs = 8; } message PluggableState { PluggableId id = 1; repeated DigitalSubcarrierGroupState dsc_groups = 10; context.Timestamp updated_at = 20; repeated DigitalSubcarrierGroupState dsc_groups = 2; context.Timestamp updated_at = 3; } message Pluggable { Loading @@ -97,44 +147,3 @@ message Pluggable { PluggableConfig config = 2; PluggableState state = 3; } No newline at end of file // ----------------------------------------------------------------------------- // RPC I/O Messages // ----------------------------------------------------------------------------- message CreatePluggableRequest { context.DeviceId device = 1; int32 preferred_pluggable_index = 2; // -1 for auto (physical slot number in the device(router)) PluggableConfig initial_config = 10; } message ListPluggablesRequest { context.DeviceId device = 1; View view_level = 2; } message ListPluggablesResponse { repeated Pluggable pluggables = 1; } message GetPluggableRequest { PluggableId id = 1; View view_level = 2; } message DeletePluggableRequest { PluggableId id = 1; } message ConfigurePluggableRequest { PluggableConfig config = 1; View view_level = 2; int32 apply_timeout_seconds = 10; // Not Implemented yet (for timeout) } // to control the level of detail in responses enum View { VIEW_UNSPECIFIED = 0; VIEW_CONFIG = 1; VIEW_STATE = 2; VIEW_FULL = 3; } proto/policy_action.proto +1 −0 Viewed Changes for proto/policy_action.proto: 1 added line, 0 removed lines. Original line number Diff line number Diff line Loading @@ -28,6 +28,7 @@ enum PolicyRuleActionEnum { POLICYRULE_ACTION_ADD_SERVICE_CONSTRAINT = 3; POLICY_RULE_ACTION_CALL_SERVICE_RPC = 4; POLICY_RULE_ACTION_RECALCULATE_PATH = 5; POLICY_RULE_ACTION_GENERATE_FAILURE_NOTIFICATION = 6; } // Action configuration Loading proto/telemetry_frontend.proto +6 −0 Viewed Changes for proto/telemetry_frontend.proto: 6 added lines, 0 removed lines. Original line number Diff line number Diff line Loading @@ -36,6 +36,7 @@ message CollectorId { context.Timestamp start_time = 5; // Timestamp when Collector start execution context.Timestamp end_time = 6; // Timestamp when Collector stop execution INTCollector int_collector = 7; // Extra optional information about INT collectors CollectorMetaInfo coll_meta_info= 8; // Extra optional collector information } message INTCollector { Loading @@ -45,6 +46,11 @@ message INTCollector { string context_id = 4; // Context identifier related to this collector } message CollectorMetaInfo { context.DeviceDriverEnum device_driver = 1; string device_type = 2; } message CollectorFilter { // Collector that fulfill the filter are those that match ALL the following fields. // An empty list means: any value is accepted. Loading Loading
proto/context.proto +3 −2 Viewed Changes for proto/context.proto: 3 added lines, 2 removed lines. Original line number Diff line number Diff line Loading @@ -260,8 +260,9 @@ enum DeviceDriverEnum { DEVICEDRIVER_GNMI_NOKIA_SRLINUX = 19; DEVICEDRIVER_OPENROADM = 20; DEVICEDRIVER_RESTCONF_OPENCONFIG = 21; DEVICEDRIVER_CUSTOM_IPOWDM = 22; DEVICEDRIVER_MIKROTIK_ROUTEROS = 23; DEVICEDRIVER_NETCONF_OC_PLUGGABLE = 22; DEVICEDRIVER_CUSTOM_IPOWDM = 23; DEVICEDRIVER_MIKROTIK_ROUTEROS = 24; } enum DeviceOperationalStatusEnum { Loading
proto/kpi_sample_types.proto +5 −1 Viewed Changes for proto/kpi_sample_types.proto: 5 added lines, 1 removed line. Original line number Diff line number Diff line Loading @@ -77,6 +77,10 @@ enum KpiSampleType { KPISAMPLETYPE_INT_DROP_REASON = 2202; // PLUGGABLES KPISAMPLETYPE_PRE_FEC_BER = 2301; KPISAMPLETYPE_PRE_FEC_BER_PLUGGABLE = 2301; KPISAMPLETYPE_RECEIVED_POWER_PLUGGABLE = 2302; // PLUGGABLES Aggregated Output KPIs KPISAMPLETYPE_PRE_FEC_BER_PLUGGABLE_AGG_OUTPUT = 3301; KPISAMPLETYPE_RECEIVED_POWER_PLUGGABLE_AGG_OUTPUT = 3302; }
proto/pluggables.proto +59 −50 Viewed Changes for proto/pluggables.proto: 59 added lines, 50 removed lines. Original line number Diff line number Diff line Loading @@ -28,6 +28,48 @@ service PluggablesService { } message CreatePluggableRequest { context.DeviceId device = 1; int32 preferred_pluggable_index = 2; // -1 for auto (physical slot number in the device(router)) PluggableConfig initial_config = 3; } message ListPluggablesRequest { context.DeviceId device = 1; View view_level = 2; } message ListPluggablesResponse { repeated Pluggable pluggables = 1; } message GetPluggableRequest { PluggableId id = 1; View view_level = 2; } message DeletePluggableRequest { PluggableId id = 1; } message ConfigurePluggableRequest { PluggableConfig config = 1; View view_level = 2; int32 apply_timeout_seconds = 3; // Not Implemented yet (for timeout) } // to control the level of detail in responses enum View { VIEW_UNSPECIFIED = 0; VIEW_CONFIG = 1; VIEW_STATE = 2; VIEW_FULL = 3; } // ----------------------------------------------------------------------------- // Pluggable and Digital Subcarrier Messages // ----------------------------------------------------------------------------- message PluggableId { context.DeviceId device = 1; int32 pluggable_index = 2; // physical slot number in the device Loading @@ -47,8 +89,8 @@ message DigitalSubcarrierConfig { DigitalSubcarrierId id = 1; bool active = 2; double target_output_power_dbm = 3; double center_frequency_hz = 10; double symbol_rate_baud = 11; double center_frequency_hz = 4; double symbol_rate_baud = 5; } message DigitalSubcarrierState { Loading @@ -56,7 +98,7 @@ message DigitalSubcarrierState { bool active = 2; double measured_output_power_dbm = 3; double osnr_db = 4; context.Timestamp updated_at = 10; context.Timestamp updated_at = 5; } message DigitalSubcarrierGroupConfig { Loading @@ -64,7 +106,7 @@ message DigitalSubcarrierGroupConfig { int32 group_size = 2; // expected number of DSCs double group_capacity_gbps = 3; // from YANG group capacity in Gbps double subcarrier_spacing_mhz = 4; // from YANG digital-subcarrier-spacing repeated DigitalSubcarrierConfig subcarriers = 10; repeated DigitalSubcarrierConfig subcarriers = 5; } message DigitalSubcarrierGroupState { Loading @@ -72,8 +114,15 @@ message DigitalSubcarrierGroupState { int32 count = 2; // available DSCs double group_capacity_gbps = 3; double subcarrier_spacing_mhz = 4; repeated DigitalSubcarrierState subcarriers = 10; context.Timestamp updated_at = 20; repeated DigitalSubcarrierState subcarriers = 5; context.Timestamp updated_at = 6; } message PluggableChannelConfig { string channel_name = 1; double center_frequency_mhz = 2; double target_output_power_dbm = 3; repeated DigitalSubcarrierGroupConfig dsc_groups = 4; } message PluggableConfig { Loading @@ -83,13 +132,14 @@ message PluggableConfig { int32 operational_mode = 4; // e.g., 0=off and 1=on int32 line_port = 5; // line port number string channel_name = 6; // channel name repeated DigitalSubcarrierGroupConfig dsc_groups = 10; repeated DigitalSubcarrierGroupConfig dsc_groups = 7; repeated PluggableChannelConfig channel_configs = 8; } message PluggableState { PluggableId id = 1; repeated DigitalSubcarrierGroupState dsc_groups = 10; context.Timestamp updated_at = 20; repeated DigitalSubcarrierGroupState dsc_groups = 2; context.Timestamp updated_at = 3; } message Pluggable { Loading @@ -97,44 +147,3 @@ message Pluggable { PluggableConfig config = 2; PluggableState state = 3; } No newline at end of file // ----------------------------------------------------------------------------- // RPC I/O Messages // ----------------------------------------------------------------------------- message CreatePluggableRequest { context.DeviceId device = 1; int32 preferred_pluggable_index = 2; // -1 for auto (physical slot number in the device(router)) PluggableConfig initial_config = 10; } message ListPluggablesRequest { context.DeviceId device = 1; View view_level = 2; } message ListPluggablesResponse { repeated Pluggable pluggables = 1; } message GetPluggableRequest { PluggableId id = 1; View view_level = 2; } message DeletePluggableRequest { PluggableId id = 1; } message ConfigurePluggableRequest { PluggableConfig config = 1; View view_level = 2; int32 apply_timeout_seconds = 10; // Not Implemented yet (for timeout) } // to control the level of detail in responses enum View { VIEW_UNSPECIFIED = 0; VIEW_CONFIG = 1; VIEW_STATE = 2; VIEW_FULL = 3; }
proto/policy_action.proto +1 −0 Viewed Changes for proto/policy_action.proto: 1 added line, 0 removed lines. Original line number Diff line number Diff line Loading @@ -28,6 +28,7 @@ enum PolicyRuleActionEnum { POLICYRULE_ACTION_ADD_SERVICE_CONSTRAINT = 3; POLICY_RULE_ACTION_CALL_SERVICE_RPC = 4; POLICY_RULE_ACTION_RECALCULATE_PATH = 5; POLICY_RULE_ACTION_GENERATE_FAILURE_NOTIFICATION = 6; } // Action configuration Loading
proto/telemetry_frontend.proto +6 −0 Viewed Changes for proto/telemetry_frontend.proto: 6 added lines, 0 removed lines. Original line number Diff line number Diff line Loading @@ -36,6 +36,7 @@ message CollectorId { context.Timestamp start_time = 5; // Timestamp when Collector start execution context.Timestamp end_time = 6; // Timestamp when Collector stop execution INTCollector int_collector = 7; // Extra optional information about INT collectors CollectorMetaInfo coll_meta_info= 8; // Extra optional collector information } message INTCollector { Loading @@ -45,6 +46,11 @@ message INTCollector { string context_id = 4; // Context identifier related to this collector } message CollectorMetaInfo { context.DeviceDriverEnum device_driver = 1; string device_type = 2; } message CollectorFilter { // Collector that fulfill the filter are those that match ALL the following fields. // An empty list means: any value is accepted. Loading