Tests > Tools > Mock IETF ACTN SDN Ctrl:

  - Ref: https://datatracker.ietf.org/doc/draft-ietf-teas-yang-te/

The aim of this server is to enable testing the IetfActnDeviceDriver and the IetfActnServiceHandler.

Follow the steps below to perform the test:

## 1. Deploy TeraFlowSDN controller and the scenario

Deploy the test scenario "ietf_actn_deploy.sh":

```bash

source src/tests/tools/mock_ietf_actn_sdn_ctrl/scenario/ietf_actn_deploy.sh

./deploy/all.sh

```

## 2. Install requirements and run the Mock IETF ACTN SDN controller

__NOTE__: if you run the Mock IETF ACTN SDN controller from the PyEnv used for developping on the TeraFlowSDN framework,

## 1. Install requirements for the Mock IETF ACTN SDN controller

__NOTE__: if you run the Mock IETF ACTN SDN controller from the PyEnv used for developing on the TeraFlowSDN

framework and you followed the official steps in

[Development Guide > Configure Environment > Python](https://labs.etsi.org/rep/tfs/controller/-/wikis/2.-Development-Guide/2.1.-Configure-Environment/2.1.1.-Python),

all the requirements are already in place. Install them only if you execute it in a separate/standalone environment.

Install the required dependencies as follows:

```bash

pip install Flask==2.1.3 Flask-RESTful==0.3.9

pip install -r src/tests/tools/mock_ietf_actn_sdn_ctrl/requirements.in

```

Run the Mock IETF ACTN SDN Controller as follows:

python src/tests/tools/mock_ietf_actn_sdn_ctrl/MockIetfActnSdnCtrl.py

```

## 3. Deploy the test descriptors

Edit the descriptors to meet your environment specifications.

Edit "network_descriptors.json" and change IP address and port of the IETF ACTN SDN controller of the "ACTN" device.

- Set value of config rule "_connect/address" to the address of the host where the Mock IETF ACTN SDN controller is

  running (default="192.168.1.1").

- Set value of config rule "_connect/port" to the port where your Mock IETF ACTN SDN controller is listening on

  (default="8443").

Upload the "network_descriptors.json" through the TeraFlowSDN WebUI.

- If not already selected, select Context(admin)/Topology(admin).

- Check that a network topology with 4 routers + 1 IETF ACTN radio system are loaded. They should form 2 rings.

Upload the "service_descriptor.json" through the TeraFlowSDN WebUI.

- Check that 2 services have been created.

- The "actn-svc" should have a connection and be supported by a sub-service.

- The sub-service should also have a connection.

- The R1, R3, and MW devices should have configuration rules established.

# 4. Delete the IETF ACTN service

Find the "mw-svc" on the WebUI, navigate to its details, and delete the service pressing the "Delete Service" button.

The service, sub-service, and device configuration rules should be removed.

## 2. Run the Mock IETF ACTN SDN controller

Run the Mock IETF ACTN SDN Controller as follows:

```bash

python src/tests/tools/mock_ietf_actn_sdn_ctrl/MockIetfActnSdnCtrl.py

```

# See the License for the specific language governing permissions and

# limitations under the License.

# Make folder containing the script the root folder for its execution

cd $(dirname $0)

docker build -t mock-ietf-actn-sdn-ctrl:test -f Dockerfile .

docker tag mock-ietf-actn-sdn-ctrl:test localhost:32000/tfs/mock-ietf-actn-sdn-ctrl:test

docker push localhost:32000/tfs/mock-ietf-actn-sdn-ctrl:test

# See the License for the specific language governing permissions and

# limitations under the License.

# Make folder containing the script the root folder for its execution

cd $(dirname $0)

python MockIetfActnSdnCtrl.py