Newer
Older
<!-- Copyright 2022-2023 ETSI TeraFlowSDN - TFS OSG (https://tfs.etsi.org/)
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. -->
<config>
<!-- TCP port where the BGP is listening for incoming bgp4 connections. Optional Parameter. Default value: 179 (BGP Port) -->
<BGP4Port>12179</BGP4Port>
<BGPIdentifier>7.7.7.7</BGPIdentifier>
<!-- TCP port to connect to manage the BGP connection. Default value: 1112 -->
<BGP4ManagementPort>1112</BGP4ManagementPort>
<!-- Peers to which this Peer is going to establish connection -->
<configPeer>
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
<export>false</export>
<import>true</import>
<peerPort>179</peerPort>
</configPeer>
<!-- Ficheros log (servidor, protocolo PCEP y OSPF). Campos opcionales-->
<BGP4LogFile>BGP4Parser2.log</BGP4LogFile><!-- Default value: BGP4Parser.log -->
<BGP4LogFileClient>BGP4Client2.log</BGP4LogFileClient><!-- Default value: BGP4Client.log-->
<BGP4LogFileServer>BGP4Server2.log</BGP4LogFileServer><!-- Default value: BGP4Server.log-->
<!-- If the tcp no delay option is used or not. Optional Parameter. Default value: false. -->
<nodelay>true</nodelay>
<!-- Waiting Time to re-connect to clients. Default value: 6000 ms. -->
<delay>40000</delay>
<setTraces>true</setTraces>
<!-- OPEN Parameters -->
<!-- RFC 4271. This 2-octet unsigned integer indicates the number of seconds the sender proposes for the value of the Hold Timer.
Upon receipt of an OPEN message, a BGP speaker MUST calculate the value of the Hold Timer by using the smaller of its configured
Hold Time and the Hold Time received in the OPEN message. The Hold Time MUST be either zero or at least three seconds. An
implementation MAY reject connections on the basis of the Hold Time. The calculated value indicates the maximum number of
seconds that may elapse between the receipt of successive KEEPALIVE and/or UPDATE messages from the sender. -->
<holdTime>180</holdTime><!-- Optional Parameter. Default value: 3. -->
<!-- RFC 4271. This 1-octet unsigned integer indicates the protocol version number of the message. The current BGP version number is 4. -->
<version>4</version><!-- Optional Parameter. Default value: 4. -->
<!-- RFC 4271. This 2-octet unsigned integer indicates the Autonomous System number of the sender.-->
<myAutonomousSystem>65006</myAutonomousSystem>
<!-- RFC 4271. This 4-octet unsigned integer indicates the BGP Identifier of the sender. A given BGP speaker sets the value of its BGP
Identifier to an IP address that is assigned to that BGP speaker. The value of the BGP Identifier is determined upon
startup and is the same for every local interface and BGP peer. -->
<!--<BGPIdentifier>192.168.1.200</BGPIdentifier> -->
<!-- If the peer is in charge of sending its topology (only the interdomain Links) to the other BGP peer it is connected to. Default: false -->
<sendTopology>false</sendTopology>
<!-- If the peer is in charge of sending its whole topology to the other BGP peer it is connected to. Default: false -->
<sendIntradomainLinks>true</sendIntradomainLinks>
<!-- Optional Parameter. How to learn the topology. Possibilities: fromXML, fromBGP. Default: fromBGP -->
<learnTopology>fromBGP</learnTopology>
<!-- Topology network to read. It is mandatory if and only if learnTopology parameter is fromXML. -->
<!--<topologyFile>src/test/resources/network1.xml</topologyFile>-->
<!-- Optional Parameter. Instance Identifier for node and link NLRI. See rfc 6549. Default value: 0-->
<!--<instanceID>0</instanceID>-->
<!-- Optional Parameter. Default value: localhost -->
<localBGPAddress>0.0.0.0</localBGPAddress>
</config>