#!/bin/bash
# Copyright 2021-2023 H2020 TeraFlow (https://www.teraflow-h2020.eu/)
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


########################################################################################################################
# Read deployment settings
########################################################################################################################

# If not already set, set the URL of your local Docker registry where the images will be uploaded to.
# Leave it blank if you do not want to use any Docker registry.
export TFS_REGISTRY_IMAGE=${TFS_REGISTRY_IMAGE:-""}
#export TFS_REGISTRY_IMAGE="http://my-container-registry.local/"

# If not already set, set the list of components you want to build images for, and deploy.
# By default, only basic components are deployed
export TFS_COMPONENTS=${TFS_COMPONENTS:-"context device monitoring service compute webui"}

# If not already set, set the tag you want to use for your images.
export TFS_IMAGE_TAG=${TFS_IMAGE_TAG:-"dev"}

# If not already set, set the name of the Kubernetes namespace to deploy to.
export TFS_K8S_NAMESPACE=${TFS_K8S_NAMESPACE:-"tfs"}

# If not already set, set additional manifest files to be applied after the deployment
export TFS_EXTRA_MANIFESTS=${TFS_EXTRA_MANIFESTS:-""}

# If not already set, set the new Grafana admin password
export TFS_GRAFANA_PASSWORD=${TFS_GRAFANA_PASSWORD:-"admin123+"}

# If not already set, disable skip-build flag.
# If TFS_SKIP_BUILD is "YES", the containers are not rebuilt-retagged-repushed and existing ones are used.
export TFS_SKIP_BUILD=${TFS_SKIP_BUILD:-""}

########################################################################################################################
# Automated steps start here
########################################################################################################################

# Constants
GITLAB_REPO_URL="registry.gitlab.com/teraflow-h2020/controller"
TMP_FOLDER="./tmp"

# Create a tmp folder for files modified during the deployment
TMP_MANIFESTS_FOLDER="$TMP_FOLDER/manifests"
mkdir -p $TMP_MANIFESTS_FOLDER
TMP_LOGS_FOLDER="$TMP_FOLDER/logs"
mkdir -p $TMP_LOGS_FOLDER

echo "Deleting and Creating a new namespace..."
kubectl delete namespace $TFS_K8S_NAMESPACE
kubectl create namespace $TFS_K8S_NAMESPACE
printf "\n"

echo "Deploying components and collecting environment variables..."
ENV_VARS_SCRIPT=tfs_runtime_env_vars.sh
echo "# Environment variables for TeraFlowSDN deployment" > $ENV_VARS_SCRIPT
PYTHONPATH=$(pwd)/src
echo "export PYTHONPATH=${PYTHONPATH}" >> $ENV_VARS_SCRIPT

for COMPONENT in $TFS_COMPONENTS; do
    echo "Processing '$COMPONENT' component..."

    if [ "$TFS_SKIP_BUILD" != "YES" ]; then
        echo "  Building Docker image..."
        BUILD_LOG="$TMP_LOGS_FOLDER/build_${COMPONENT}.log"

        if [ "$COMPONENT" == "automation" ] || [ "$COMPONENT" == "policy" ]; then
            docker build -t "$COMPONENT:$TFS_IMAGE_TAG" -f ./src/"$COMPONENT"/Dockerfile ./src/"$COMPONENT"/ > "$BUILD_LOG"
        elif [ "$COMPONENT" == "pathcomp" ]; then
            BUILD_LOG="$TMP_LOGS_FOLDER/build_${COMPONENT}-frontend.log"
            docker build -t "$COMPONENT-frontend:$TFS_IMAGE_TAG" -f ./src/"$COMPONENT"/frontend/Dockerfile . > "$BUILD_LOG"

            BUILD_LOG="$TMP_LOGS_FOLDER/build_${COMPONENT}-backend.log"
            docker build -t "$COMPONENT-backend:$TFS_IMAGE_TAG" -f ./src/"$COMPONENT"/backend/Dockerfile . > "$BUILD_LOG"
            # next command is redundant, but helpful to keep cache updated between rebuilds
            IMAGE_NAME="$COMPONENT-backend:$TFS_IMAGE_TAG-builder"
            docker build -t "$IMAGE_NAME" --target builder -f ./src/"$COMPONENT"/backend/Dockerfile . >> "$BUILD_LOG"
        elif [ "$COMPONENT" == "dlt" ]; then
            BUILD_LOG="$TMP_LOGS_FOLDER/build_${COMPONENT}-connector.log"
            docker build -t "$COMPONENT-connector:$TFS_IMAGE_TAG" -f ./src/"$COMPONENT"/connector/Dockerfile . > "$BUILD_LOG"

            #BUILD_LOG="$TMP_LOGS_FOLDER/build_${COMPONENT}-gateway.log"
            #docker build -t "$COMPONENT-gateway:$TFS_IMAGE_TAG" -f ./src/"$COMPONENT"/gateway/Dockerfile . > "$BUILD_LOG"
        else
            docker build -t "$COMPONENT:$TFS_IMAGE_TAG" -f ./src/"$COMPONENT"/Dockerfile . > "$BUILD_LOG"
        fi

        if [ -n "$TFS_REGISTRY_IMAGE" ]; then
            echo "  Pushing Docker image to '$TFS_REGISTRY_IMAGE'..."

            if [ "$COMPONENT" == "pathcomp" ]; then
                IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-frontend:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')

                TAG_LOG="$TMP_LOGS_FOLDER/tag_${COMPONENT}-frontend.log"
                docker tag "$COMPONENT-frontend:$TFS_IMAGE_TAG" "$IMAGE_URL" > "$TAG_LOG"

                PUSH_LOG="$TMP_LOGS_FOLDER/push_${COMPONENT}-frontend.log"
                docker push "$IMAGE_URL" > "$PUSH_LOG"

                IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-backend:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')

                TAG_LOG="$TMP_LOGS_FOLDER/tag_${COMPONENT}-backend.log"
                docker tag "$COMPONENT-backend:$TFS_IMAGE_TAG" "$IMAGE_URL" > "$TAG_LOG"

                PUSH_LOG="$TMP_LOGS_FOLDER/push_${COMPONENT}-backend.log"
                docker push "$IMAGE_URL" > "$PUSH_LOG"
            elif [ "$COMPONENT" == "dlt" ]; then
                IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-connector:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')

                TAG_LOG="$TMP_LOGS_FOLDER/tag_${COMPONENT}-connector.log"
                docker tag "$COMPONENT-connector:$TFS_IMAGE_TAG" "$IMAGE_URL" > "$TAG_LOG"

                PUSH_LOG="$TMP_LOGS_FOLDER/push_${COMPONENT}-connector.log"
                docker push "$IMAGE_URL" > "$PUSH_LOG"

                #IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-gateway:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')

                #TAG_LOG="$TMP_LOGS_FOLDER/tag_${COMPONENT}-gateway.log"
                #docker tag "$COMPONENT-gateway:$TFS_IMAGE_TAG" "$IMAGE_URL" > "$TAG_LOG"

                #PUSH_LOG="$TMP_LOGS_FOLDER/push_${COMPONENT}-gateway.log"
                #docker push "$IMAGE_URL" > "$PUSH_LOG"
            else
                IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')

                TAG_LOG="$TMP_LOGS_FOLDER/tag_${COMPONENT}.log"
                docker tag "$COMPONENT:$TFS_IMAGE_TAG" "$IMAGE_URL" > "$TAG_LOG"

                PUSH_LOG="$TMP_LOGS_FOLDER/push_${COMPONENT}.log"
                docker push "$IMAGE_URL" > "$PUSH_LOG"
            fi
        fi
    fi

    echo "  Adapting '$COMPONENT' manifest file..."
    MANIFEST="$TMP_MANIFESTS_FOLDER/${COMPONENT}service.yaml"
    cp ./manifests/"${COMPONENT}"service.yaml "$MANIFEST"

    if [ -n "$TFS_REGISTRY_IMAGE" ]; then
        # Registry is set
        if [ "$COMPONENT" == "pathcomp" ]; then
            IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-frontend:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-frontend:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-frontend:${VERSION}#image: $IMAGE_URL#g" "$MANIFEST"

            IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-backend:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-backend:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-backend:${VERSION}#image: $IMAGE_URL#g" "$MANIFEST"
        elif [ "$COMPONENT" == "dlt" ]; then
            IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-connector:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-connector:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-connector:${VERSION}#image: $IMAGE_URL#g" "$MANIFEST"

            #IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT-gateway:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')
            #VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-gateway:" "$MANIFEST" | cut -d ":" -f3)
            #sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-gateway:${VERSION}#image: $IMAGE_URL#g" "$MANIFEST"
        else
            IMAGE_URL=$(echo "$TFS_REGISTRY_IMAGE/$COMPONENT:$TFS_IMAGE_TAG" | sed 's,//,/,g' | sed 's,http:/,,g')
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT:${VERSION}#image: $IMAGE_URL#g" "$MANIFEST"
        fi

        sed -E -i "s#imagePullPolicy: .*#imagePullPolicy: Always#g" "$MANIFEST"
    else
        # Registry is not set
        if [ "$COMPONENT" == "pathcomp" ]; then
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-frontend:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-frontend:${VERSION}#image: $COMPONENT-frontend:$TFS_IMAGE_TAG#g" "$MANIFEST"

            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-backend:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-backend:${VERSION}#image: $COMPONENT-backend:$TFS_IMAGE_TAG#g" "$MANIFEST"
        elif [ "$COMPONENT" == "dlt" ]; then
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-connector:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-connector:${VERSION}#image: $COMPONENT-connector:$TFS_IMAGE_TAG#g" "$MANIFEST"

            #VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}-gateway:" "$MANIFEST" | cut -d ":" -f3)
            #sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT-gateway:${VERSION}#image: $COMPONENT-gateway:$TFS_IMAGE_TAG#g" "$MANIFEST"
        else
            VERSION=$(grep -i "${GITLAB_REPO_URL}/${COMPONENT}:" "$MANIFEST" | cut -d ":" -f3)
            sed -E -i "s#image: $GITLAB_REPO_URL/$COMPONENT:${VERSION}#image: $COMPONENT:$TFS_IMAGE_TAG#g" "$MANIFEST"
        fi

        sed -E -i "s#imagePullPolicy: .*#imagePullPolicy: Never#g" "$MANIFEST"
    fi

    # TODO: harmonize names of the monitoring component

    echo "  Deploying '$COMPONENT' component to Kubernetes..."
    DEPLOY_LOG="$TMP_LOGS_FOLDER/deploy_${COMPONENT}.log"
    kubectl --namespace $TFS_K8S_NAMESPACE apply -f "$MANIFEST" > "$DEPLOY_LOG"
    COMPONENT_OBJNAME=$(echo "${COMPONENT}" | sed "s/\_/-/")
    kubectl --namespace $TFS_K8S_NAMESPACE scale deployment --replicas=0 ${COMPONENT_OBJNAME}service >> "$DEPLOY_LOG"
    kubectl --namespace $TFS_K8S_NAMESPACE scale deployment --replicas=1 ${COMPONENT_OBJNAME}service >> "$DEPLOY_LOG"

    echo "  Collecting env-vars for '$COMPONENT' component..."

    SERVICE_DATA=$(kubectl get service ${COMPONENT_OBJNAME}service --namespace $TFS_K8S_NAMESPACE -o json)
    if [ -z "${SERVICE_DATA}" ]; then continue; fi

    # Env vars for service's host address
    SERVICE_HOST=$(echo ${SERVICE_DATA} | jq -r '.spec.clusterIP')
    if [ -z "${SERVICE_HOST}" ]; then continue; fi
    ENVVAR_HOST=$(echo "${COMPONENT}service_SERVICE_HOST" | tr '[:lower:]' '[:upper:]')
    echo "export ${ENVVAR_HOST}=${SERVICE_HOST}" >> $ENV_VARS_SCRIPT

    # Env vars for service's 'grpc' port (if any)
    SERVICE_PORT_GRPC=$(echo ${SERVICE_DATA} | jq -r '.spec.ports[] | select(.name=="grpc") | .port')
    if [ -n "${SERVICE_PORT_GRPC}" ]; then
        ENVVAR_PORT_GRPC=$(echo "${COMPONENT}service_SERVICE_PORT_GRPC" | tr '[:lower:]' '[:upper:]')
        echo "export ${ENVVAR_PORT_GRPC}=${SERVICE_PORT_GRPC}" >> $ENV_VARS_SCRIPT
    fi

    # Env vars for service's 'http' port (if any)
    SERVICE_PORT_HTTP=$(echo ${SERVICE_DATA} | jq -r '.spec.ports[] | select(.name=="http") | .port')
    if [ -n "${SERVICE_PORT_HTTP}" ]; then
        ENVVAR_PORT_HTTP=$(echo "${COMPONENT}service_SERVICE_PORT_HTTP" | tr '[:lower:]' '[:upper:]')
        echo "export ${ENVVAR_PORT_HTTP}=${SERVICE_PORT_HTTP}" >> $ENV_VARS_SCRIPT
    fi

    printf "\n"
done

echo "Deploying extra manifests..."
for EXTRA_MANIFEST in $TFS_EXTRA_MANIFESTS; do
    echo "Processing manifest '$EXTRA_MANIFEST'..."
    kubectl --namespace $TFS_K8S_NAMESPACE apply -f $EXTRA_MANIFEST
    printf "\n"
done
printf "\n"

# By now, leave these controls here. Some component dependencies are not well handled.

if [[ "$TFS_COMPONENTS" == *"monitoring"* ]]; then
    echo "Waiting for 'MonitoringDB' component..."
    # Kubernetes does not implement --for='condition=available' for statefulsets.
    # By now, we assume a single replica of monitoringdb. To be updated in future releases.
    kubectl wait --namespace $TFS_K8S_NAMESPACE \
        --for=jsonpath='{.status.readyReplicas}'=1 --timeout=300s statefulset/monitoringdb
    printf "\n"
fi

for COMPONENT in $TFS_COMPONENTS; do
    echo "Waiting for '$COMPONENT' component..."
    COMPONENT_OBJNAME=$(echo "${COMPONENT}" | sed "s/\_/-/")
    kubectl wait --namespace $TFS_K8S_NAMESPACE \
        --for='condition=available' --timeout=300s deployment/${COMPONENT_OBJNAME}service
    printf "\n"
done

if [[ "$TFS_COMPONENTS" == *"webui"* ]] && [[ "$TFS_COMPONENTS" == *"monitoring"* ]]; then
    echo "Configuring WebUI DataStores and Dashboards..."
    sleep 3

    # INFLUXDB_HOST="monitoringservice"
    # INFLUXDB_PORT=$(kubectl --namespace $TFS_K8S_NAMESPACE get service/monitoringservice -o jsonpath='{.spec.ports[?(@.name=="influxdb")].port}')
    # INFLUXDB_URL="http://${INFLUXDB_HOST}:${INFLUXDB_PORT}"
    # INFLUXDB_USER=$(kubectl --namespace $TFS_K8S_NAMESPACE get secrets influxdb-secrets -o jsonpath='{.data.INFLUXDB_ADMIN_USER}' | base64 --decode)
    # INFLUXDB_PASSWORD=$(kubectl --namespace $TFS_K8S_NAMESPACE get secrets influxdb-secrets -o jsonpath='{.data.INFLUXDB_ADMIN_PASSWORD}' | base64 --decode)
    # INFLUXDB_DATABASE=$(kubectl --namespace $TFS_K8S_NAMESPACE get secrets influxdb-secrets -o jsonpath='{.data.INFLUXDB_DB}' | base64 --decode)

    # Exposed through the ingress controller "tfs-ingress"
    GRAFANA_HOSTNAME="127.0.0.1"
    GRAFANA_PORT="80"
    GRAFANA_BASEURL="/grafana"

    # Default Grafana credentials
    GRAFANA_USERNAME="admin"
    GRAFANA_PASSWORD="admin"

    # Default Grafana API URL
    GRAFANA_URL_DEFAULT="http://${GRAFANA_USERNAME}:${GRAFANA_PASSWORD}@${GRAFANA_HOSTNAME}:${GRAFANA_PORT}${GRAFANA_BASEURL}"

    # Updated Grafana API URL
    GRAFANA_URL_UPDATED="http://${GRAFANA_USERNAME}:${TFS_GRAFANA_PASSWORD}@${GRAFANA_HOSTNAME}:${GRAFANA_PORT}${GRAFANA_BASEURL}"

    echo "export GRAFANA_URL_UPDATED=${GRAFANA_URL_UPDATED}" >> $ENV_VARS_SCRIPT

    echo "Connecting to grafana at URL: ${GRAFANA_URL_DEFAULT}..."

    # Configure Grafana Admin Password
    # Ref: https://grafana.com/docs/grafana/latest/http_api/user/#change-password
    curl -X PUT -H "Content-Type: application/json" -d '{
        "oldPassword": "'${GRAFANA_PASSWORD}'",
        "newPassword": "'${TFS_GRAFANA_PASSWORD}'",
        "confirmNew" : "'${TFS_GRAFANA_PASSWORD}'"
    }' ${GRAFANA_URL_DEFAULT}/api/user/password
    echo

    # Ref: https://grafana.com/docs/grafana/latest/http_api/data_source/
    # TODO: replace user, password and database by variables to be saved
    echo "Creating a datasource..."
    curl -X POST -H "Content-Type: application/json" -H "Accept: application/json" -d '{
        "access"   : "proxy",
        "type"     : "postgres",
        "name"     : "monitoringdb",
        "url"      : "monitoringservice:8812",
        "database" : "monitoring",
        "user"     : "admin",
        "basicAuth": false,
        "isDefault": true,
        "jsonData" : {
            "sslmode"               : "disable",
            "postgresVersion"       : 1100,
            "maxOpenConns"          : 0,
            "maxIdleConns"          : 2,
            "connMaxLifetime"       : 14400,
            "tlsAuth"               : false,
            "tlsAuthWithCACert"     : false,
            "timescaledb"           : false,
            "tlsConfigurationMethod": "file-path",
            "tlsSkipVerify"         : true
        },
        "secureJsonData": {
            "password": "quest"
        }
    }' ${GRAFANA_URL_UPDATED}/api/datasources
    echo

    # Create Monitoring Dashboard
    # Ref: https://grafana.com/docs/grafana/latest/http_api/dashboard/
    curl -X POST -H "Content-Type: application/json" \
        -d '@src/webui/grafana_dashboard_psql.json' \
        ${GRAFANA_URL_UPDATED}/api/dashboards/db
    echo

    DASHBOARD_URL="${GRAFANA_URL_UPDATED}/api/dashboards/uid/tf-l3-monit"
    DASHBOARD_ID=$(curl -s "${DASHBOARD_URL}" | jq '.dashboard.id')
    curl -X POST ${GRAFANA_URL_UPDATED}/api/user/stars/dashboard/${DASHBOARD_ID}

    printf "\n\n"
fi

./show_deploy.sh

echo "Done!"
