Pre-merge code cleanup and header fixing.

              valueFrom:

              valueFrom:

                fieldRef:

                fieldRef:

                  fieldPath: metadata.namespace

                  fieldPath: metadata.namespace

            - name: MONITORING_SERVICE_HOST

              value: monitoringservice

            - name: SERVICE_SERVICE_HOST

            - name: SERVICE_SERVICE_HOST

              value: serviceservice

              value: serviceservice

            - name: CONTEXT_SERVICE_HOST

            - name: CONTEXT_SERVICE_HOST

              value: contextservice

              value: contextservice

            - name: MONITORING_SERVICE_HOST

          image: labs.etsi.org:5050/tfs/controller/policy:0.1.0

              value: monitoringservice

          image: registry.gitlab.com/teraflow-h2020/controller/policy:0.1.0

          imagePullPolicy: Always

          imagePullPolicy: Always

          livenessProbe:

          livenessProbe:

            failureThreshold: 3

            failureThreshold: 3

#!/usr/bin/python

#  Copyright 2019-present Open Networking Foundation

#

#  Licensed under the Apache License, Version 2.0 (the "License");

#  you may not use this file except in compliance with the License.

#  You may obtain a copy of the License at

#

#      http://www.apache.org/licenses/LICENSE-2.0

#

#  Unless required by applicable law or agreed to in writing, software

#  distributed under the License is distributed on an "AS IS" BASIS,

#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

#  See the License for the specific language governing permissions and

#  limitations under the License.

import argparse

from mininet.cli import CLI

from mininet.log import setLogLevel

from mininet.net import Mininet

from mininet.node import Host

from mininet.topo import Topo

from stratum import StratumBmv2Switch

CPU_PORT = 255

class IPv4Host(Host):

    """Host that can be configured with an IPv4 gateway (default route).

    """

    def config(self, mac=None, ip=None, defaultRoute=None, lo='up', gw=None,

               **_params):

        super(IPv4Host, self).config(mac, ip, defaultRoute, lo, **_params)

        self.cmd('ip -4 addr flush dev %s' % self.defaultIntf())

        self.cmd('ip -6 addr flush dev %s' % self.defaultIntf())

        self.cmd('ip -4 link set up %s' % self.defaultIntf())

        self.cmd('ip -4 addr add %s dev %s' % (ip, self.defaultIntf()))

        if gw:

            self.cmd('ip -4 route add default via %s' % gw)

        # Disable offload

        for attr in ["rx", "tx", "sg"]:

            cmd = "/sbin/ethtool --offload %s %s off" % (

                self.defaultIntf(), attr)

            self.cmd(cmd)

        def updateIP():

            return ip.split('/')[0]

        self.defaultIntf().updateIP = updateIP

class TutorialTopo(Topo):

    """Basic Server-Client topology with IPv4 hosts"""

    def __init__(self, *args, **kwargs):

        Topo.__init__(self, *args, **kwargs)

        # Switches

        # gRPC port 50001

        switch1 = self.addSwitch('switch1', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50002

        switch2 = self.addSwitch('switch2', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50003

        switch3 = self.addSwitch('switch3', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50004

        switch4 = self.addSwitch('switch4', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50005

        switch5 = self.addSwitch('switch5', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50006

        switch6 = self.addSwitch('switch6', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50007

        switch7 = self.addSwitch('switch7', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # gRPC port 50008

        switch8 = self.addSwitch('switch8', cls=StratumBmv2Switch, cpuport=CPU_PORT)

        # Hosts

        client = self.addHost('client', cls=IPv4Host, mac="aa:bb:cc:dd:ee:11",

                            ip='10.0.0.1/24', gw='10.0.0.100')

        server = self.addHost('server', cls=IPv4Host, mac="aa:bb:cc:dd:ee:22",

                            ip='10.0.0.2/24', gw='10.0.0.100')

        # Switch links

        self.addLink(switch1, switch2)  # Switch1:port 1, Switch2:port 1

        self.addLink(switch1, switch4)  # Switch1:port 2, Switch4:port 1

        self.addLink(switch1, switch6)  # Switch1:port 3, Switch6:port 1

        self.addLink(switch2, switch3)  # Switch2:port 2, Switch3:port 1

        self.addLink(switch4, switch5)  # Switch4:port 2, Switch5:port 1

        self.addLink(switch6, switch7)  # Switch6:port 2, Switch7:port 1

        self.addLink(switch3, switch8)  # Switch3:port 2, Switch8:port 1

        self.addLink(switch5, switch8)  # Switch5:port 2, Switch8:port 2

        self.addLink(switch7, switch8)  # Switch7:port 2, Switch8:port 3

        # Host links

        self.addLink(client, switch1)   # Switch1: port 4

        self.addLink(server, switch8)   # Switch8: port 4

def main():

    net = Mininet(topo=TutorialTopo(), controller=None)

    net.start()

    #get hosts

    client = net.hosts[0]

    client.setARP('10.0.0.2', 'aa:bb:cc:dd:ee:22')

    server = net.hosts[1]

    server.setARP('10.0.0.1', 'aa:bb:cc:dd:ee:11')

    CLI(net)

    net.stop()

    print '#' * 80

    print 'ATTENTION: Mininet was stopped! Perhaps accidentally?'

    print 'No worries, it will restart automatically in a few seconds...'

    print 'To access again the Mininet CLI, use `make mn-cli`'

    print 'To detach from the CLI (without stopping), press Ctrl-D'

    print 'To permanently quit Mininet, use `make stop`'

    print '#' * 80

if __name__ == "__main__":

    parser = argparse.ArgumentParser(

        description='Mininet topology script for 2x2 fabric with stratum_bmv2 and IPv4 hosts')

    args = parser.parse_args()

    setLogLevel('info')

    main()

# Copyright 2022-2023 ETSI TeraFlowSDN - TFS OSG (https://tfs.etsi.org/)

#

# Licensed under the Apache License, Version 2.0 (the "License");

# you may not use this file except in compliance with the License.

# You may obtain a copy of the License at

#

#      http://www.apache.org/licenses/LICENSE-2.0

#

# Unless required by applicable law or agreed to in writing, software

# distributed under the License is distributed on an "AS IS" BASIS,

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

# See the License for the specific language governing permissions and

# limitations under the License.

import os

from typing import Dict, List, Tuple

from common.Constants import DEFAULT_CONTEXT_NAME, DEFAULT_TOPOLOGY_NAME

from common.tools.object_factory.Context import json_context, json_context_id

from common.tools.object_factory.Device import (

    json_device_connect_rules, json_device_emulated_connect_rules, json_device_emulated_packet_router_disabled,

    json_device_connect_rules, json_device_id, json_device_p4_disabled,

    json_device_emulated_tapi_disabled, json_device_id, json_device_packetrouter_disabled, json_device_tapi_disabled)

from common.tools.object_factory.Service import (

    get_service_uuid, json_service_l3nm_planned,json_service_p4_planned)

from common.tools.object_factory.ConfigRule import (

    json_config_rule_set, json_config_rule_delete)

from common.tools.object_factory.EndPoint import json_endpoint, json_endpoint_ids, json_endpoints, json_endpoint_id

from common.tools.object_factory.Link import get_link_uuid, json_link, json_link_id

from common.tools.object_factory.Topology import json_topology, json_topology_id

from common.proto.kpi_sample_types_pb2 import KpiSampleType

# ----- Context --------------------------------------------------------------------------------------------------------

CONTEXT_ID = json_context_id(DEFAULT_CONTEXT_NAME)

CONTEXT    = json_context(DEFAULT_CONTEXT_NAME)

# ----- Topology -------------------------------------------------------------------------------------------------------

TOPOLOGY_ID = json_topology_id(DEFAULT_TOPOLOGY_NAME, context_id=CONTEXT_ID)

TOPOLOGY    = json_topology(DEFAULT_TOPOLOGY_NAME, context_id=CONTEXT_ID)

# ----- Monitoring Samples ---------------------------------------------------------------------------------------------

PACKET_PORT_SAMPLE_TYPES = [

    KpiSampleType.KPISAMPLETYPE_PACKETS_TRANSMITTED,

    KpiSampleType.KPISAMPLETYPE_PACKETS_RECEIVED,

    KpiSampleType.KPISAMPLETYPE_BYTES_TRANSMITTED,

    KpiSampleType.KPISAMPLETYPE_BYTES_RECEIVED,

]

# ----- Device Credentials and Settings --------------------------------------------------------------------------------

# ----- Devices --------------------------------------------------------------------------------------------------------

CUR_PATH = os.path.dirname(os.path.abspath(__file__))

DEVICE_SW1_UUID             = 'SW1'

DEVICE_SW1_TIMEOUT          = 60

DEVICE_SW1_ID               = json_device_id(DEVICE_SW1_UUID)

DEVICE_SW1                  = json_device_p4_disabled(DEVICE_SW1_UUID)

DEVICE_SW1_DPID             = 1

DEVICE_SW1_NAME             = DEVICE_SW1_UUID

DEVICE_SW1_IP_ADDR          = '129.16.37.136'

DEVICE_SW1_PORT             = '50001'

DEVICE_SW1_VENDOR           = 'Open Networking Foundation'

DEVICE_SW1_HW_VER           = 'BMv2 simple_switch'

DEVICE_SW1_SW_VER           = 'Stratum'

DEVICE_SW1_BIN_PATH         = '/root/p4/bmv2.json'

DEVICE_SW1_INFO_PATH        = '/root/p4/p4info.txt'

DEVICE_SW1_ENDPOINT_DEFS    = [('1', 'port', []), ('2', 'port', []), ('3', 'port', [])]

DEVICE_SW1_ENDPOINTS        = json_endpoints(DEVICE_SW1_ID, DEVICE_SW1_ENDPOINT_DEFS)

DEVICE_SW1_ENDPOINT_IDS     = json_endpoint_ids(DEVICE_SW1_ID, DEVICE_SW1_ENDPOINT_DEFS)

ENDPOINT_ID_SW1_1           = DEVICE_SW1_ENDPOINTS[0]['endpoint_id']

ENDPOINT_ID_SW1_2           = DEVICE_SW1_ENDPOINTS[1]['endpoint_id']

ENDPOINT_ID_SW1_3           = DEVICE_SW1_ENDPOINTS[2]['endpoint_id']

DEVICE_SW1_CONNECT_RULES    = json_device_connect_rules(

    DEVICE_SW1_IP_ADDR,

    DEVICE_SW1_PORT,

    {

        'id':       DEVICE_SW1_DPID,

        'name':     DEVICE_SW1_NAME,

        'vendor':   DEVICE_SW1_VENDOR,

        'hw_ver':   DEVICE_SW1_HW_VER,

        'sw_ver':   DEVICE_SW1_SW_VER,

        'timeout':  DEVICE_SW1_TIMEOUT,

        'p4bin':    DEVICE_SW1_BIN_PATH,

        'p4info':   DEVICE_SW1_INFO_PATH

    }

)

DEVICE_SW2_UUID             = 'SW2'

DEVICE_SW2_TIMEOUT          = 60

DEVICE_SW2_ID               = json_device_id(DEVICE_SW2_UUID)

DEVICE_SW2                  = json_device_p4_disabled(DEVICE_SW2_UUID)

DEVICE_SW2_DPID             = 1

DEVICE_SW2_NAME             = DEVICE_SW2_UUID

DEVICE_SW2_IP_ADDR          = '129.16.37.136'

DEVICE_SW2_PORT             = '50002'

DEVICE_SW2_VENDOR           = 'Open Networking Foundation'

DEVICE_SW2_HW_VER           = 'BMv2 simple_switch'

DEVICE_SW2_SW_VER           = 'Stratum'

DEVICE_SW2_BIN_PATH         = '/root/p4/bmv2.json'

DEVICE_SW2_INFO_PATH        = '/root/p4/p4info.txt'

DEVICE_SW2_ENDPOINT_DEFS    = [('1', 'port', []), ('2', 'port', [])]

DEVICE_SW2_ENDPOINTS        = json_endpoints(DEVICE_SW2_ID, DEVICE_SW2_ENDPOINT_DEFS)

DEVICE_SW2_ENDPOINT_IDS     = json_endpoint_ids(DEVICE_SW2_ID, DEVICE_SW2_ENDPOINT_DEFS)

ENDPOINT_ID_SW2_1           = DEVICE_SW2_ENDPOINTS[0]['endpoint_id']

ENDPOINT_ID_SW2_2           = DEVICE_SW2_ENDPOINTS[1]['endpoint_id']

DEVICE_SW2_CONNECT_RULES    = json_device_connect_rules(

    DEVICE_SW2_IP_ADDR,

    DEVICE_SW2_PORT,

    {

        'id':       DEVICE_SW2_DPID,

        'name':     DEVICE_SW2_NAME,

        'vendor':   DEVICE_SW2_VENDOR,

        'hw_ver':   DEVICE_SW2_HW_VER,

        'sw_ver':   DEVICE_SW2_SW_VER,

        'timeout':  DEVICE_SW2_TIMEOUT,

        'p4bin':    DEVICE_SW2_BIN_PATH,

        'p4info':   DEVICE_SW2_INFO_PATH

    }

)

DEVICE_SW3_UUID             = 'SW3'

DEVICE_SW3_TIMEOUT          = 60

DEVICE_SW3_ID               = json_device_id(DEVICE_SW3_UUID)

DEVICE_SW3                  = json_device_p4_disabled(DEVICE_SW3_UUID)

DEVICE_SW3_DPID             = 1

DEVICE_SW3_NAME             = DEVICE_SW3_UUID

DEVICE_SW3_IP_ADDR          = '129.16.37.136'

DEVICE_SW3_PORT             = '50003'

DEVICE_SW3_VENDOR           = 'Open Networking Foundation'

DEVICE_SW3_HW_VER           = 'BMv2 simple_switch'

DEVICE_SW3_SW_VER           = 'Stratum'

DEVICE_SW3_BIN_PATH         = '/root/p4/bmv2.json'

DEVICE_SW3_INFO_PATH        = '/root/p4/p4info.txt'

DEVICE_SW3_ENDPOINT_DEFS    = [('1', 'port', []), ('2', 'port', [])]

DEVICE_SW3_ENDPOINTS        = json_endpoints(DEVICE_SW3_ID, DEVICE_SW3_ENDPOINT_DEFS)

DEVICE_SW3_ENDPOINT_IDS     = json_endpoint_ids(DEVICE_SW3_ID, DEVICE_SW3_ENDPOINT_DEFS)

ENDPOINT_ID_SW3_1           = DEVICE_SW3_ENDPOINTS[0]['endpoint_id']

ENDPOINT_ID_SW3_2           = DEVICE_SW3_ENDPOINTS[1]['endpoint_id']

DEVICE_SW3_CONNECT_RULES    = json_device_connect_rules(

    DEVICE_SW3_IP_ADDR,

    DEVICE_SW3_PORT,

    {

        'id':       DEVICE_SW3_DPID,

        'name':     DEVICE_SW3_NAME,

        'vendor':   DEVICE_SW3_VENDOR,

        'hw_ver':   DEVICE_SW3_HW_VER,

        'sw_ver':   DEVICE_SW3_SW_VER,

        'timeout':  DEVICE_SW3_TIMEOUT,

        'p4bin':    DEVICE_SW3_BIN_PATH,

        'p4info':   DEVICE_SW3_INFO_PATH

    }

)

DEVICE_SW4_UUID             = 'SW4'

DEVICE_SW4_TIMEOUT          = 60

DEVICE_SW4_ID               = json_device_id(DEVICE_SW4_UUID)

DEVICE_SW4                  = json_device_p4_disabled(DEVICE_SW4_UUID)

DEVICE_SW4_DPID             = 1

DEVICE_SW4_NAME             = DEVICE_SW4_UUID

DEVICE_SW4_IP_ADDR          = '129.16.37.136'

DEVICE_SW4_PORT             = '50004'

DEVICE_SW4_VENDOR           = 'Open Networking Foundation'

DEVICE_SW4_HW_VER           = 'BMv2 simple_switch'

DEVICE_SW4_SW_VER           = 'Stratum'

DEVICE_SW4_BIN_PATH         = '/root/p4/bmv2.json'

DEVICE_SW4_INFO_PATH        = '/root/p4/p4info.txt'

DEVICE_SW4_ENDPOINT_DEFS    = [('1', 'port', []), ('2', 'port', [])]

DEVICE_SW4_ENDPOINTS        = json_endpoints(DEVICE_SW4_ID, DEVICE_SW4_ENDPOINT_DEFS)

DEVICE_SW4_ENDPOINT_IDS     = json_endpoint_ids(DEVICE_SW4_ID, DEVICE_SW4_ENDPOINT_DEFS)

ENDPOINT_ID_SW4_1           = DEVICE_SW4_ENDPOINTS[0]['endpoint_id']

ENDPOINT_ID_SW4_2           = DEVICE_SW4_ENDPOINTS[1]['endpoint_id']

DEVICE_SW4_CONNECT_RULES    = json_device_connect_rules(

    DEVICE_SW4_IP_ADDR,

    DEVICE_SW4_PORT,

    {

        'id':       DEVICE_SW4_DPID,

        'name':     DEVICE_SW4_NAME,

        'vendor':   DEVICE_SW4_VENDOR,

        'hw_ver':   DEVICE_SW4_HW_VER,

        'sw_ver':   DEVICE_SW4_SW_VER,

        'timeout':  DEVICE_SW4_TIMEOUT,

        'p4bin':    DEVICE_SW4_BIN_PATH,

        'p4info':   DEVICE_SW4_INFO_PATH

    }

)

DEVICE_SW5_UUID             = 'SW5'

DEVICE_SW5_TIMEOUT          = 60

DEVICE_SW5_ID               = json_device_id(DEVICE_SW5_UUID)

DEVICE_SW5                  = json_device_p4_disabled(DEVICE_SW5_UUID)

DEVICE_SW5_DPID             = 1

DEVICE_SW5_NAME             = DEVICE_SW5_UUID

DEVICE_SW5_IP_ADDR          = '129.16.37.136'

DEVICE_SW5_PORT             = '50005'

DEVICE_SW5_VENDOR           = 'Open Networking Foundation'

DEVICE_SW5_HW_VER           = 'BMv2 simple_switch'

DEVICE_SW5_SW_VER           = 'Stratum'

DEVICE_SW5_BIN_PATH         = '/root/p4/bmv2.json'

DEVICE_SW5_INFO_PATH        = '/root/p4/p4info.txt'

DEVICE_SW5_ENDPOINT_DEFS    = [('1', 'port', []), ('2', 'port', [])]

DEVICE_SW5_ENDPOINTS        = json_endpoints(DEVICE_SW5_ID, DEVICE_SW5_ENDPOINT_DEFS)

DEVICE_SW5_ENDPOINT_IDS     = json_endpoint_ids(DEVICE_SW5_ID, DEVICE_SW5_ENDPOINT_DEFS)

ENDPOINT_ID_SW5_1           = DEVICE_SW5_ENDPOINTS[0]['endpoint_id']

ENDPOINT_ID_SW5_2           = DEVICE_SW5_ENDPOINTS[1]['endpoint_id']

DEVICE_SW5_CONNECT_RULES    = json_device_connect_rules(

    DEVICE_SW5_IP_ADDR,

    DEVICE_SW5_PORT,

    {

        'id':       DEVICE_SW5_DPID,

        'name':     DEVICE_SW5_NAME,

        'vendor':   DEVICE_SW5_VENDOR,

        'hw_ver':   DEVICE_SW5_HW_VER,

        'sw_ver':   DEVICE_SW5_SW_VER,

        'timeout':  DEVICE_SW5_TIMEOUT,

        'p4bin':    DEVICE_SW5_BIN_PATH,

        'p4info':   DEVICE_SW5_INFO_PATH

    }

)

DEVICE_SW6_UUID             = 'SW6'

DEVICE_SW6_TIMEOUT          = 60

DEVICE_SW6_ID               = json_device_id(DEVICE_SW6_UUID)

DEVICE_SW6                  = json_device_p4_disabled(DEVICE_SW6_UUID)

DEVICE_SW6_DPID             = 1

DEVICE_SW6_NAME             = DEVICE_SW6_UUID

DEVICE_SW6_IP_ADDR          = '129.16.37.136'

DEVICE_SW6_PORT             = '50006'

DEVICE_SW6_VENDOR           = 'Open Networking Foundation'

DEVICE_SW6_HW_VER           = 'BMv2 simple_switch'

DEVICE_SW6_SW_VER           = 'Stratum'

DEVICE_SW6_BIN_PATH         = '/root/p4/bmv2.json'

DEVICE_SW6_INFO_PATH        = '/root/p4/p4info.txt'

DEVICE_SW6_ENDPOINT_DEFS    = [('1', 'port', []), ('2', 'port', []), ('3', 'port', [])]

DEVICE_SW6_ENDPOINTS        = json_endpoints(DEVICE_SW6_ID, DEVICE_SW6_ENDPOINT_DEFS)

DEVICE_SW6_ENDPOINT_IDS     = json_endpoint_ids(DEVICE_SW6_ID, DEVICE_SW6_ENDPOINT_DEFS)

ENDPOINT_ID_SW6_1           = DEVICE_SW6_ENDPOINTS[0]['endpoint_id']

ENDPOINT_ID_SW6_2           = DEVICE_SW6_ENDPOINTS[1]['endpoint_id']

ENDPOINT_ID_SW6_3           = DEVICE_SW6_ENDPOINTS[2]['endpoint_id']

DEVICE_SW6_CONNECT_RULES    = json_device_connect_rules(

    DEVICE_SW6_IP_ADDR,

    DEVICE_SW6_PORT,

    {

        'id':       DEVICE_SW6_DPID,

        'name':     DEVICE_SW6_NAME,

        'vendor':   DEVICE_SW6_VENDOR,

        'hw_ver':   DEVICE_SW6_HW_VER,

        'sw_ver':   DEVICE_SW6_SW_VER,

        'timeout':  DEVICE_SW6_TIMEOUT,

        'p4bin':    DEVICE_SW6_BIN_PATH,

        'p4info':   DEVICE_SW6_INFO_PATH

    }

)

# ----- Links ----------------------------------------------------------------------------------------------------------

LINK_SW1_SW2_UUID           = get_link_uuid(ENDPOINT_ID_SW1_1, ENDPOINT_ID_SW2_1)

LINK_SW1_SW2_ID             = json_link_id(LINK_SW1_SW2_UUID)

LINK_SW1_SW2                = json_link(LINK_SW1_SW2_UUID, [ENDPOINT_ID_SW1_1, ENDPOINT_ID_SW2_1])

LINK_SW1_SW3_UUID           = get_link_uuid(ENDPOINT_ID_SW1_2, ENDPOINT_ID_SW3_1)

LINK_SW1_SW3_ID             = json_link_id(LINK_SW1_SW3_UUID)

LINK_SW1_SW3                = json_link(LINK_SW1_SW3_UUID, [ENDPOINT_ID_SW1_2, ENDPOINT_ID_SW3_1])

LINK_SW2_SW4_UUID           = get_link_uuid(ENDPOINT_ID_SW2_2, ENDPOINT_ID_SW4_1)

LINK_SW2_SW4_ID             = json_link_id(LINK_SW2_SW4_UUID)

LINK_SW2_SW4                = json_link(LINK_SW2_SW4_UUID, [ENDPOINT_ID_SW2_2, ENDPOINT_ID_SW4_1])

LINK_SW3_SW5_UUID           = get_link_uuid(ENDPOINT_ID_SW3_2, ENDPOINT_ID_SW5_1)

LINK_SW3_SW5_ID             = json_link_id(LINK_SW3_SW5_UUID)

LINK_SW3_SW5                = json_link(LINK_SW3_SW5_UUID, [ENDPOINT_ID_SW3_2, ENDPOINT_ID_SW5_1])

LINK_SW4_SW6_UUID           = get_link_uuid(ENDPOINT_ID_SW4_2, ENDPOINT_ID_SW6_1)

LINK_SW4_SW6_ID             = json_link_id(LINK_SW4_SW6_UUID)

LINK_SW4_SW6                = json_link(LINK_SW4_SW6_UUID, [ENDPOINT_ID_SW4_2, ENDPOINT_ID_SW6_1])

LINK_SW5_SW6_UUID           = get_link_uuid(ENDPOINT_ID_SW5_2, ENDPOINT_ID_SW6_2)

LINK_SW5_SW6_ID             = json_link_id(LINK_SW5_SW6_UUID)

LINK_SW5_SW6                = json_link(LINK_SW5_SW6_UUID, [ENDPOINT_ID_SW5_2, ENDPOINT_ID_SW6_2])

# ----- Service ----------------------------------------------------------------------------------------------------------

#SERVICE_SW1_UUID        = get_service_uuid(ENDPOINT_ID_SW1_1, ENDPOINT_ID_SW1_2)

#SERVICE_SW1             = json_service_p4_planned(SERVICE_SW1_UUID)

#SERVICE_SW2_UUID        = get_service_uuid(ENDPOINT_ID_SW2_1, ENDPOINT_ID_SW2_2)

#SERVICE_SW2             = json_service_p4_planned(SERVICE_SW2_UUID)

SERVICE_SW1_SW6_UUID            = get_service_uuid(ENDPOINT_ID_SW1_3, ENDPOINT_ID_SW6_3)

SERVICE_SW1_SW6                 = json_service_p4_planned(SERVICE_SW1_SW6_UUID)

SERVICE_SW1_SW6_ENDPOINT_IDS    = [DEVICE_SW1_ENDPOINT_IDS[2], DEVICE_SW6_ENDPOINT_IDS[2]]

# ----- Object Collections ---------------------------------------------------------------------------------------------

CONTEXTS = [CONTEXT]

TOPOLOGIES = [TOPOLOGY]

DEVICES = [

    (DEVICE_SW1, DEVICE_SW1_CONNECT_RULES, DEVICE_SW1_ENDPOINTS),

    (DEVICE_SW2, DEVICE_SW2_CONNECT_RULES, DEVICE_SW2_ENDPOINTS),

    (DEVICE_SW3, DEVICE_SW3_CONNECT_RULES, DEVICE_SW3_ENDPOINTS),

    (DEVICE_SW4, DEVICE_SW4_CONNECT_RULES, DEVICE_SW4_ENDPOINTS),

    (DEVICE_SW5, DEVICE_SW5_CONNECT_RULES, DEVICE_SW5_ENDPOINTS),

    (DEVICE_SW6, DEVICE_SW6_CONNECT_RULES, DEVICE_SW6_ENDPOINTS),

]

LINKS = [

    LINK_SW1_SW2,

    LINK_SW1_SW3,

    LINK_SW2_SW4,

    LINK_SW3_SW5,

    LINK_SW4_SW6,

    LINK_SW5_SW6

    ] 

#SERVICES = [(SERVICE_SW1, DEVICE_SW1_ENDPOINT_IDS), (SERVICE_SW2, DEVICE_SW2_ENDPOINT_IDS)]

#SERVICE_SW1_SW2_ENDPOINT_IDS = DEVICE_SW1_ENDPOINT_IDS + DEVICE_SW2_ENDPOINT_IDS

SERVICES = [(SERVICE_SW1_SW6, SERVICE_SW1_SW6_ENDPOINT_IDS)]

 No newline at end of file