# BeaconReportingConfig

## Properties
Name | Type | Description | Notes
------------ | ------------- | ------------- | -------------
**ReportingCondition** | **int32** | Reporting condition for the Beacon Report as per Table 9-89 of IEEE 802.11-2016 0 = Report to be issued after each measurement 1 = measured RCPI level is greater than the threshold 2 = measured RCPI level is less than the threshold 3 = measured RSNI level is greater than the threshold 4 = measured RSNI level is less than the threshold 5 = measured RCPI level is greater than a threshold defined by an offset from the serving AP’s reference RCPI 6 = measured RCPI level is less than a threshold defined by an offset from the serving AP’s reference RCPI 7 = measured RSNI level is greater than a threshold defined by an offset from the serving AP’s reference RSNI 8 = measured RSNI level is less than a threshold defined by an offset from the serving AP’s reference RSNI 9 = measured RCPI level is in a range bound by the serving AP’s reference RCPI and an offset from the serving AP’s reference RCPI 10 = measured RSNI level is in a range bound by the serving AP’s reference RSNI and an offset from the serving AP’s reference RSNI  | [default to null]
**Threshold** | **int32** | The threshold subfield contains either the threshold value or the offset value to be used for conditional reporting.   For reportingCondition subfield with values 1 and 2, the threshold value is a logarithmic function of the received signal power, as defined 9.4.2.38 of IEEE 802.11-2016.   For reportingCondition subfield values 3 and 4, the threshold value is a logarithmic function of the signal-to-noise ratio, as described in 9.4.2.41 of IEEE 802.11-2016.   For reportingCondition subfield values 5 to 10, the offset value is an 8-bit 2s complement integer in units of 0.5 dBm. The indicated reporting condition applies individually to each measured Beacon, Measurement Pilot, or Probe Response frame.  | [default to null]

[[Back to Model list]](../README.md#documentation-for-models) [[Back to API list]](../README.md#documentation-for-api-endpoints) [[Back to README]](../README.md)