Enhance titan-test-system-framework with XSD (ce12efc0) · Commits · CTI Tools / Titan Test System Framework

ccsrc/Framework/include/codec_gen.hh

+1 −1

Original line number	Diff line number	Diff line
		@@ -50,7 +50,7 @@ public: //! \publicsection
		*/
		virtual int encode(const TPDUEnc &p_message, OCTETSTRING &p_data) = 0;
		/*!
		* \fn int decode(const OCTETSTRING& p_, TPDUDec& p_message, params_its* p_params = NULL);
		* \fn int decode(const OCTETSTRING& p_, TPDUDec& p_message, params* p_params = NULL);
		* \brief Encode typed message into an octet string format
		* \param[in] p_data The message in its octet string
		* \param[out] p_message The decoded typed message

ccsrc/Framework/include/layer.hh

+1 −1

Original line number	Diff line number	Diff line
		@@ -102,7 +102,7 @@ public: //! \publicsection

		/*!
		* \virtual
		* \fn void receive_data(OCTETSTRING& data, params_its& params);
		* \fn void receive_data(OCTETSTRING& data, params& params);
		* \brief Receive bytes formated data from the lower layers
		* \param[in] p_data The bytes formated data received
		* \param[in] p_params Some lower layers parameters values when data was received

ccsrc/Framework/include/layer_factory.hh

+0 −58

Original line number	Diff line number	Diff line
		@@ -36,52 +36,10 @@ public: //! \publicsection
		* \param[in] p_params Optional parameters
		* \return 0 on success, -1 otherwise
		* \remark The description below introduces layers stack in case of ITS project:
		* CAM layer
		* next_header : btpA\|btpB (overwrite BTP.type)
		* header_type : tsb\|gbc
		* header_sub_type : sh (single hop)
		* DENM layer
		* next_header : btpA\|btpB (overwrite BTP.type)
		* header_type : tsb\|gbc
		* BTP layer
		* type : btpA\|btpB
		* destination port: dst_port
		* source port : src_port
		* device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
		* GN layer
		* its_aid : ITS AID as defined by ETSI TS 102 965 V1.2.1. Default: 141
		* ll_address : GeoNetworking address of the Test System
		* latitude : latitude of the Test System
		* longitude : longitude of the Test System
		* beaconing : Set to 1 if GnLayer shall start beaconing
		* Beaconing timer expiry : expiry (ms)
		* device_mode : Set to 1 if the layer shall encapsulate upper layer PDU
		* secured_mode : Set to 1 if message exchanges shall be signed
		* encrypted_mode : Set to 1 if message exchanges shall be encrypted
		* NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1
		* certificate : Certificate identifier the Test Adapter shall use
		* secure_db_path : Path to the certificates and keys storage location
		* hash : Hash algorithm to be used when secured mode is set
		* Authorized values are SHA-256 or SHA-384
		* Default: SHA-256
		* signature : Signature algorithm to be used when secured mode is set
		* Authorized values are NISTP-256, BP-256 and BP-384
		* Default: NISTP-256
		* cypher : Cyphering algorithm to be used when secured mode is set
		* Ethernet layer
		* mac_src :Source MAC address
		* mac_bc :Broadcast address
		* eth_type : Ethernet type
		* Commsignia layer
		* mac_src : Device MAC address, used to discard packets
		* To indicate no filering, use the value 000000000000
		* mac_bc : Broadcast address
		* eth_type : Ethernet type, used to discard packets
		* target_host : Device address
		* target_port : Device port
		* source_port : Test System port
		* interface_id: Interface id, used to discard packets
		* tx_power : TX power (dB)
		* UDP layer (IP/UDP based on Pcap)
		* dst_ip : destination IPv4 address (aa.bb.cc.dd)
		* dst_port: destination port
		@@ -99,22 +57,6 @@ public: //! \publicsection
		* frame_offset: Frame offset, used to skip packets with frame number < frame_offset
		* time_offset : Time offset, used to skip packets with time offset < time_offset
		* save_mode : 1 to save sent packet, 0 otherwise
		* Here are some examples:
		* GeoNetworking multiple component case:
		* NodeB.geoNetworkingPort.params :=
		"GN(ll_address=04e548000001,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/COMMSIGNIA(mac_src=04e548000001,mac_bc=FFFFFFFFFFFF,eth_type=8947,target_host=10.200.1.101,target_port=7942,source_port=7943,its_aid=141,interface_id=2,tx_power=-32)/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=04e548000001,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=04e548000001,file=/home/vagrant/TriesAndDelete/etsi_its/testdata/TC_AUTO_IOT_DENM_RWW_BV_01_short.pcap,filter=and
		(udp port 30000 or udp port 7943))" NodeC.geoNetworkingPort.params :=
		"GN(ll_address=70b3d5791b48,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/COMMSIGNIA(mac_src=70b3d5791b48,mac_bc=FFFFFFFFFFFF,eth_type=8947,target_host=10.200.1.101,target_port=7942,source_port=7943,its_aid=141,interface_id=2,tx_power=-32)/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=70b3d5791b48,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=70b3d5791b48,file=/home/vagrant/TriesAndDelete/etsi_its/testdata/TC_AUTO_IOT_DENM_RWW_BV_01_short.pcap,filter=and
		(udp port 30000 or udp port 7943))"
		* NodeB.geoNetworkingPort.params :=
		"GN(ll_address=04e548000001,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=04e548000001,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=04e548000001,file=/home/vagrant/TriesAndDelete/etsi_its/testdata/TC_AUTO_IOT_DENM_RWW_BV_01.pcap,filter=and
		ether src 04e548000001)" #NodeC.geoNetworkingPort.params :=
		"GN(ll_address=70b3d5791b48,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=70b3d5791b48,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=70b3d5791b48,file=/home/vagrant/TriesAndDelete/etsi_its/testdata/TC_AUTO_IOT_DENM_RWW_BV_01.pcap,filter=and
		ether src 70b3d5791b48)"
		* UpperTester port based on UDP
		* system.utPort.params :=
		"UT_GN/UDP(dst_ip=192.168.1.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and
		udp port 12346)"
		* \pure
		*/
		virtual layer *create_layer(const std::string &p_type, const std::string &p_params) = 0;

ttcn/LibHttp/module.mk

0 → 120000

+1 −0

Original line number	Diff line number	Diff line
		module_cise.mk
		No newline at end of file

ttcn/LibHttp/module_cise.mk

0 → 100644

+19 −0

Original line number	Diff line number	Diff line
		sources := \
		ttcn/LibHttp_BinaryMessageBodyTypes.ttcn \
		ttcn/LibHttp_EncdecDeclarations.ttcn \
		ttcn/LibHttp_Functions.ttcn \
		ttcn/LibHttp_JsonMessageBodyTypes.ttcn \
		ttcn/LibHttp_JsonTemplates.ttcn \
		ttcn/LibHttp_JSONTypes.ttcn \
		ttcn/LibHttp_MessageBodyTypes.ttcn \
		ttcn/LibHttp_Pics.ttcn \
		ttcn/LibHttp_Pixits.ttcn \
		ttcn/LibHttp_Templates.ttcn \
		ttcn/LibHttp_TestSystem.ttcn \
		ttcn/LibHttp_TypesAndValues.ttcn \
		ttcn/LibHttp_XMLTypes.ttcn \


		# Please, move and comment the module you need to overwrite tofit your project
		# ttcn/LibHttp_XmlMessageBodyTypes.ttcn \
		# ttcn/LibHttp_XmlTemplates.ttcn